Produktseite - Type 50 - SVS Automation

2/2 - Way Solenoid Valve

Valve type 50 is a compact 2/2-way pilot operated solenoid
valve with an orifice of 10 mm for general applications with
gases and liquids.

Valve for oxygene applications
Non-standard coil voltages
Higher ambient temperature range
Non-standard equipment

Ports	Normally closed in bar
G3/8 (DN 10)	0,02 - 12
G1/2 (DN 10)	0,02 - 12

General

type of construction	2/2-way poppet valve, normally closed NC, coil 360° rotatable
operation	electrically
ports	G3/8 - G1/2
ambient temperature	-20°C to +50°C, higher acceptable ambient temperature range on request
fluid temperature	dependent on sealing material and coil
viscosity	max. 21 mm²/s (cst)
material	body: brass plunger tube at 50A-..-AC2: brass, at type 50A-..-AE1: stainless steel internal parts: stainless steel sealing: see type selection
mounting	2 threads M4 on the bottom side
installation	in any position, preferable vertically fixed solenoid coil
unit of supply	without connector

Electrical

voltage	DC voltage or AC voltage
standard voltages	24 V DC, 24 V 50Hz, 230 V 50Hz
non-standard voltage on request	6 V - 200 V DC, 12 V - 240 V 50Hz or 60Hz
acceptable voltage tolerance	±10%
power consumption	see specifications at solenoid coils
coil temperature classification	temperature class F (155°C), winding class H (180°C)
duty cylce	100%, continuous operation
protection class	IP65 according DIN EN 60529 (DIN 40050) with correctly mounted connector

Pneumatic – Hydraulic

fluid	all liquids and gases, non-aggressive to the used material
max. valve body pressure	PN 25
response time	depending on operating pressure and fluid
non-standard equipment on request	coil type with cable, bright nickel-plated or chemical nickel-plated, coils for temperature class H (180°C)